Plamen Tena N, Installation And Operating Instructions Manual

Page: 22 / 76

Output control
Certain experience is required for output control because it depends on a number of factors,
such as negative pressure inside the chimney (draught) and fuel quality. Therefore, read
carefully these instructions to learn how to operate your stove to achieve the best performance.
The output is controlled by means of primary air supply controls on the top plate and
secondary air supply control on the front panel.
The stove output depends on the negative pressure inside the chimney (draught). In case of
excessive negative pressure, it is recommended to reduce it by means of the fluepipe damper
and then to proceed with output adjustment by means of air supply controls.
Setting up the air supply controls for the rated output:
Setting up of the air supply control for minimum output:
Primary air control position
(on the top plate)
Secondary air control position
(knob on the front panel)
Primary air control position
(on the top plate)
Secondary air control position
(knob on the front panel)
Figure 2
22