Please pay special attention to:
Stove operation in transitional periods
During the transitional periods (when external temperature exceeds 15° C), problems may be
encountered due to insufficient negative pressure (poor or no draught) in the chimney. In such a case,
try to achieve necessary draught by warming up the chimney. If this does not work, do not proceed
with the firing.
Lighting the fire
Never use spirit, petrol or any other flammable liquid to light the fire.
Never keep flammable liquids or objects in the vicinity of the stove!
Maintenance and cleaning
At the end of each heating season, clean the stove, fluepipes and chimney from soot deposits.
All external parts of the stove are enamelled and thus permanently protected against corrosion and
elevated temperatures. Clean the enamelled parts with a wet soft cloth.
The door glass may be cleaned with ordinary window glass cleaners when cold. Should the glass get
stained at the initial stage of the firing, clean it with a dry cloth before it gets too hot.
Should any problems occur during the operation, contact your chimney sweeper or the closest local
Service.
Any repair/maintenance works on the stove shall be performed by authorised service
personnel and only original spare parts shall be used.
During normal operation, particularly if wet fuel is used, soot and tar buildup may occur. Regular
inspection and cleaning are therefore essential to prevent the risk of chimney fire. In case of chimney
fire, proceed as follows:
- never use water to extinguish the fire
- close all air supply passages to the stove and chimney
- having extinguished the fire, call the chimney sweeper to inspect the chimney
-
call the manufacturer's authorised service to inspect the stove
Warranty
The Manufacturer's warranty shall apply provided that the stove is used in accordance with these
Installation and Operating Instructions.
Space heating capacities
The size of the heated space depends on the heating conditions and thermal insulation.
Occasional (intermittent) heating or heating at intervals longer than 8 hours should be considered as
less favourable or even unfavourable heating conditions.
Heating conditions
Rated output 6 kW
- Favourable conditions
- Less favourable conditions
- Unfavourable conditions
124 m3
73 m3
48 m3
19
Summary of Contents for Maestral
