Certain experience is also required for the proper setup of the air supply control device. Therefore,
follow our advice to learn easily how to operate your stove.
For setting up the air supply control for starting the fire and some time thereafter see Figure 2.
When the fire has blazed up and sufficient ember bed has been created, set the air supply control
back to the position ensuring the air supply that is sufficient for the stove to develop as much heat as
required.
By adding 3 - 4 kg of the fuel and keeping the air supply control set to maximum output, the stove will
reach 9-10 kW.
For air supply control position to reach the rated output of 6 kW see:
Figure 3 – when using wood
Figure 4 – when using wood briquettes
To operate the stove at the minimum output, set the primary air supply control to fully closed position
(Figure 5). If you have a fluepipe damper installed, close the damper as well.
Make sure to add only as much fuel as it is necessary to maintain the fire.
18
Summary of Contents for Maestral
