background image

07/18/07

Freestanding Gas Stove

FOR YOUR SAFETY
What to do if you smell gas:

 

Do not try to light any appli-
ance

  Do not touch any electri-

cal switch: do not use any 
phone in your building.

  Immediately call your gas 

supplier from a neighbour's 
phone. Follow the gas sup-
plier's instructions.

  If you  cannot reach your 

gas supplier, call the fi re 
department.

WARNING:  
Improper installation, adjustment, altera-
tion, service or maintenance can cause 
injury or property damage. Refer to this 
manual. For assistance or additional in-
formation consult an authorized installer, 
service agency or the gas supplier.

FOR YOUR SAFETY
Do not store or use gasoline or other fl am-
mable vapours and liquids in the vicinity of 
this or any other appliance.

Installation and service must be performed 
by an authorized installer, service agency or 
the gas supplier.

PLEASE KEEP THESE INSTRUCTIONS 

FOR FUTURE REFERENCE

Owners &
Installation

 

Manual

LISTINGS AND CODE APPROVALS

These gas appliances have been tested in 
accordance with AS4553-2000, NZS 5262 
and have been certifi ed by the Australian Gas 
Association for installation and operation as 
described in these Installation and Operating 
Instructions.

Your unit should be serviced annually by 
an authorised service person.

918-534

Models: F38-NG2
 F38-LPG2 

Summary of Contents for F38-LPG2

























Reviews: