Plaid Systems Spruce Controller Gen 2, Instruction Manual

Page: 8 / 20

8
1. Remove the faceplate from the Controller. If necessary, install drywall anchors: drill
holes in alignment with the mounting holes, and insert the provided drywall anchors.
2. Using the screws provided, screw the Spruce Controller Base into the drywall
anchors, or directly into bare wood.
Physical Installation
Mount Spruce
Spruce is not weatherproof
. If installing Spruce outdoors, you must
mount Spruce in a weatherproof enclosure. Failure to do so will void the
warranty.
!