3.4
Loading and editing of presets on the device / Routing
In the flash memory of the DSP-controler up to 80 presets can be stored. With the encoder wheel and the MENÜ-
button the presets can be loaded. Presets can be named with up to 16 characters.
Please use NO special characters for naming the presets.
Load preset:
–
–
Push the MENÜ-Button one time
Choose the desired preset by turning the encoder wheel. The presets stored in
the memory will one by one appear on the display.
For loading the selected preset push the encoder wheel.
–
Confirm the appearing security query by turning the encoder wheel to the right until YES will appear in
the display with capitalisation.
–
By pushing the encoder wheel again the selected preset will be loaded into the DSP.
Routing, pre setting (Input to Outputs) Mixer in
→
Out 1,2,3
By pushing the MENÜ-button five times the sub menue
„Routing“ will
be called up on the display.
This consist of two settings:
1)
2)
Sub
Mono 3-Way
This pre-selection changes the mixer for the signal selection in the outputs 1, 2 and 3.
By selecting 2 (Mono 3-Weg) only XLR-Input A is active!
USER MANUAL PowerPac 4003 DSP
19
© PL-Audio GmbH & Co.KG | Siegener Straße 6 | 57482 Wenden | www.pl-audio.de Version: October 2021 V 1.0
–
Sub:
Out 1
Out 2
Out 3
Mono 3-way:
