Pressure Measurement and Monitoring
PMR06
Precision Bourdon Tube
Pressure Gauge
•
nominal sizes 160 and 250 mm
•
accuracy class 0,6
•
versions with brass connection and
stainless steel housing or completely
in stainless steel
•
with or without liquid filling for
vibration damping
•
measuring ranges from
-1200...0 mbar to 0...1600 bar
Description:
The pressure gauges of the PMR06 series operate according
to the bourdon tube principle. They can be supplied in brass
or stainless steel, filled or unfilled. A drawn brass or stainless
steel tube formed into s spiral is filled with the medium and
deforms depending on the pressure.
This movement is indicated by a pointer measuring
mechanism, which can be damped by means of the optionally
available liquid filling, so that vibrations or oscillations are only
shown to advantage in a greatly reduced form.
The wear of the moving parts is also reduced by the natural
lubrication of the filling liquid and the penetration of corrosive
gases and the formation of condensation water is prevented.
The stainless steel design allows pressure measurement even
in the most aggressive liquids and gases.
The pressure gauges are equipped with a threaded
connection at the bottom or rear.
Typical applications:
The PMR06 pressure gauges are used wherever precise
pressure measurements are required.
For mobile use, versions are available in a test case, complete
with shut-off valve and connection pieces.
The stainless steel versions are resistant to most aggressive
media and are often used in the chemical and petrochemical
industries, in the food industry, in pharmaceutical production
or in power stations, where they have been providing the best
results for decades.
PKP Prozessmesstechnik GmbH
Borsigstr. 24 • D-65205 Wiesbaden
S
+49 (0) 6122-7055-0 •
T
+49 (0) 6122 7055-50
[email protected] • www.pkp.de
20200421
