Flow Measurement and Monitoring
DR08
Turbine Flow Sensor
•
for low viscosity media
•
high measuring accuracy and resolution
•
very low series dispersion
•
made of plastic,
brass or stainless steel
•
high temperature resistance
•
small installation dimensions
•
temperature measurement
can be integrated
•
ranges: 2...40 l/min up to 0,4...25 m³/h
•
P
max
: 300 bar, T
max
: 150 °C
Description:
The flow meters of the DR08 series operate according to the
turbine wheel principle.
The liquid flows into the turbine body and causes a rotor to
rotate in proportion to the flow. Depending on the model, this
rotation is converted into an output frequency by an inductive
proximity sensor or a Hall sensor.
One of the main features of the DR08 turbine flowmeters is
the very low series scatter of identical devices. This eliminates
the need for individual adjustment of the individual turbines to
the respective downstream electronics, making the DR08
ideally suited for use in series applications
Typical applications:
Due to their design, large measuring range and high
measuring accuracy, the DR08 turbine flowmeters are
suitable for applications in these areas:
•
cooling water measurement
•
medical technology
•
plastics industry
•
solar plant
•
machine tools
•
photo laboratory systems
•
tapping and dosing systems
•
cooling and heating applications
•
heat quantity measurement
PKP Prozessmesstechnik GmbH
Borsigstr. 24 • D-65205 Wiesbaden
S
+49 (0) 6122-7055-0 •
T
+49 (0) 6122 7055-50
[email protected] • www.pkp.de
20200915