~
52
~
2. Installation
2.1 Scope of delivery
S
COPE OF DELIVERY
/
ACCESSORIES
1x
H
EAT PUMP DRYER
1x
E
XTERNAL WATER DRAIN HOSE
1x
I
NSTRUCTION MANUAL
➢
Before initial operation, please check that all components are present and that
they are not visibly damaged.
2.2 Unpacking / Site
1.
Unpack the appliance carefully. Dispose of the packaging as described in chapter
waste management.
2.
The appliance
must not
build in.
3.
Completely remove the transport-protection. Be very careful and do not use any
aggressive or abrasive detergents to remove residuals of the transport-protection.
4.
Check that the appliance and the power cord are not damaged.
5.
Do not install the appliance in a bathroom or a place where it may come in
contact with water or rain; otherwise the insulation of the electrical system will
be damaged. Do not install the appliance in a room where explosive or flammable
gases are stored.
6.
Protect the appliance from direct sunlight.
7.
Install the appliance in a dry and well-ventilated place. The room temperature
must
be higher than +5
0
C.
8.
Install the appliance in a suitable position with an adequate distance from sources
of heat and cold.
9.
Do not install the appliance on a carpet / fitted carpet.
10.
Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
