~
65
~
6.
Press the button
« S
TART
/ P
AUSE
» to start the selected drying programme.
The display indicates the remaining duration of the drying process in hours and
minutes; based on the selected programme, the maximum load allowed and the
required drying level.
7.
When the drying programme is finished, an acoustic signal sounds; s. chapter 4.5
E
ND OF A DRYING PROGRAMME
and see also chapter 4.8 H
OW TO SWITCH
ON
/
OFF THE ACOUSTIC SIGNAL
.
8.
When the drying programme is finished, turn the rotary knob for the programme
selection back to «
O
FF
» to switch off the appliance completely.
It is possible that the current run time of the selected drying programme
(depending on the drying situation) will be adjusted automatically so that it may
vary from the drying time which is indicated on the display.
If the set drying programme cannot be combined with the set drying function(s),
the error code «
ErS
(error) » is indicated on the display. Cancel the selected
function and / or select another one.
4.4.1 Drying programme « T
IME
»
❖
If you select the drying programme «
T
IME
», you can set an
individual drying
time
.
❖
Due to the individually adjustable drying time, this programme is very suitable for
drying thick or multi-layered textiles, e.g. terry towels, or for drying individual
pieces of laundry or smaller quantities of laundry.
Thick or multi-layered textiles, e.g. bed linen, jeans, jackets, etc. are not easy to
dry. If they are not completely dry at the end of a drying programme, we
recommend using the programme « T
IME
» to dry the laundry completely by
setting an individual drying time.
H
OW TO SET AND START THE DRYING PROGRAMME
«
T
IME
»
1.
Open the door.
2.
Put the laundry to be dried in the drum of the appliance.
3.
Close the door.
4.
Set the programme «
T
IME
» using the
ROTARY KNOB
. The dryer is now switched
on.
5.
Press the
BUTTON
«
T
IME
» repeatedly until the desired drying time (e.g. 30 / 60
/ 90 minutes
10
) is displayed.
10
Available time units: depending on model.
