34
Install a cover panel with moveable slats, which do not obstruct the air vent.
Check condition and cleanliness of the filters.
Check if the air which is extracted by the hood is replaced to avoid negative
pressure.
When you run your appliance in recirculating mode, check if the carbon filter
has been replaced on time (min. every 3-6 months).
If the appliance has a malfunction not noted on the schedule or if you have
checked all items on the schedule but the problem still exists, please contact
the shop you purchased the appliance at.
6
TECHNICAL DATA
6
Model
Cooker hood
Material
Sheet steel
Max. capacity/extraction mode
210 m
3
/h
Installation width
60.00 cm
Slide switches
2
Recirculation/extraction mode
5
Power in m
3
/h
99
-
210
Power in W
-
-
87
Noise emission in db/A
55
-
72
Grease filter
1*acryl
Lights amount/W/kind
1
1*2W
LED
Connected load
87 W
Voltage
220~240V AC/50Hz
Carbon filter
1*CF 152
Dim. H/W/D in cm
8.00
60.00
46.50
Telescopic chimney in cm
-
Weight net / gross in kg
5.00
6.00
Included accessories: fixing material, instruction manual.
7
WASTE MANAGEMENT
7
1.
While unpacking, the packaging materials (polythene bags, polystyrene pieces,
etc.) should be kept away from children. CHOKING HAZARD!
2.
Old and unused appliances must be send for disposal to the responsible
recycling centre. Never expose to open flames.
3.
Before you dispose of an old appliance, render it inoperative. Unplug the
5
Extraction mode: installation with ventilation stack or air duct outwards only, wall
penetration = 120 mm, drilling about ca. 130 mm.
