36
2.
Set the switch at the bottom of the appliance to
recirculation mode
(
F
); s. fig.
below.
E
E
XTRACTION MODE
F
R
ECIRCULATION MODE
If the switch is set to recirculation mode (F), the horizontal exhaust
opening (B) will be blocked automatically. The exhaust air can only
escape via the air outlet C (s. above).
2.2 Required tools:
Drill, flat head screwdriver, cross head screwdriver, tin snips, 3/8" socket or ratchet
with extension, measuring tape, hand saw or jigsaw, insulating tape, adhesive tape.
WARNING!
Failure to install the screws or fixing device in accordance
with these instructions may result in electrical hazards.
WARNING!
Do not damage the wiring in the wall while drilling
NOTICE!
At least one assistant is required for installation.
2.3 Installation on a cupboard
1.
Specify the position of the appliance at the cupboard according to the drawing
below. Screw 4 supplied screws into the cupboard relevant to the position of
the 4 slots for the screw heads on the appliance. Do not tighten the screws
completely as you have to hang the appliance on the screw heads.
