Pkm P 1-60 BBTX, Instruction Manual

Page: 17 / 23

17
4.2 Carbon filters
Conventional carbon filters cannot be
cleaned. The capacity of these filters
is limited. You can use such filters for about 3-6 months. Replace a depleted
filter. Find further information on the
filter packaging.
4.3 Replacing of the illuminant
WARNING! Disconnect the appliance from the energy supply.
1. Let the illuminant cool down before
replacing.
2. Remove the grease filters and push out
the illuminant. Be especially careful while
doing so.
3. Pull the illuminant carefully out of the hole and disconnect the energy supply
wire.
4. Now connect the new illuminant to the
energy supply wire.
5. Push the wires back into the hole and
fix the new illuminant.
5. Trouble shooting
POSSIBLE CAUSE MEASURE
THE APPLIANCE DOES NOT WORK AT ALL.
The plug of the appliance is not connec-
ted to the socket.
The plug has become loose.
The socket is not supplied with energy. Check the corresponding socket by con-
necting it with another appliance.
Check the fuse.
The voltage is too low. Compare the
data on the model plate with the data of
your energy supplier.
18
18
1.
2.
3.
1.
2.
3.