~
52
~
H
OW TO INSTALL THE CARBON FILTERS
1.
Open the extractor hood using the « O
PEN
»
-
BUTTON
(
X
) and remove the
ALUMINIUM GREASE FILTERS
(s. fig. below).
s
X
B
UTTON FOR THE OPENING OF THE EXTRACTOR HOOD
2.
The
CARBON FILTERS
are intended to be installed on
both sides
of the motor.
3.
Place the
CARBON FILTER
on the motor and turn it clockwise until it is firmly
tightened (s. fig. below).
Fig. similar: modifications are possible.
A
M
OTOR
B
C
ARBON FILTER
C
C
LOCKWISE ROTATION
= Place the
CARBON FILTER
on the motor
and turn the filter clockwise until it is installed properly.
4.
Repeat the procedure on the other side of the motor.
5.
Reinstall the
ALUMINIUM GREASE FILTER
(
S
).
6.
If you want to uninstall the
CARBON FILTERS
, turn the filters anti-clockwise and
remove them.
WARNING!
Install the carbon filters safely and properly; otherwise, the
carbon filters can loosen and cause hazardous situations.
