44
again.
information of these detergents, so
you know if they are suitable to clean
glass ceramic.
Do not leave any residuals of a
detergent on the glass ceramic as it
can turn stained permanently.
Overcooked or melted food and stains caused by heated sugar-containing
food on the glass ceramic.
Remove
such
a
contamination
immediately with a suitable glass
ceramic scraper. Beware of cooking
zones which are still hot!
1.
Disconnect the appliance from the
mains (fuse-box).
2.
Hold the scraper in a 30
0
-angle and
scrape off the contamination to a
cold area.
3.
Clean the contaminated area with a
dish towel/kitchen paper.
4.
Proceed as described in steps 2-4 in
the previous section.
Remove such contaminations as
soon as possible. When they cool
down on the glass ceramic, they are
difficult to remove and may damage
the glass ceramic permanently.
Be very careful when using the
scraper so that you do not cut
yourself (especially, when you have
removed the safety cover).
Contamination of the control panel.
1.
Disconnect the appliance from the
mains (fuse-box).
2.
Take away the contamination.
3.
Wipe the sensors with a damp
sponge or cloth.
4.
Dry the sensors with kitchen paper.
5.
Connect the appliance to the mains
again.
The
appliance
may
beep
and
automatically turn off. The sensors may
not work properly when they are wet.
Dry the control panel carefully before
you put it into operation again.
Do not use any abrasive detergents! Do not use any organic detergents!
2
Do not use essential oils!
6. Trouble shooting
ERROR
CAUSES
MEASURES
The appliance cannot be switched on.
Break in the power supply.
Check that the appliance is
2
Detergents such as vinegar, citric acid etc.
