46
2. Installation
2.1 Unpacking and Positioning
1.
This appliance is a table-top model.
2.
Unpack the appliance carefully. Completely remove the transport-protection. Be
very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
3.
The spray arms may be equipped with a transport protection. Remove
the transport protection before installing the appliance.
4.
Install the appliance in a dry and well-ventilated place.
5.
Install the appliance on a level, dry and solid surface. Check the correct
installation with a bubble level.
6.
Always install the appliance near of a water supply line, a water drain device and
a safety plug.
7.
The back of the appliance must face the wall. The sides must be aligned to the
adjacent pieces of furniture and/or walls.
8.
Connect the appliance to the mains and water supply properly.
9.
The nameplate is inside the appliance or at the back.
2.2 Water inlet / drainage installation
1.
The appliance is equipped with a water supply and a water drain hose which can
be installed on the right or left to ensure proper installation.
2.
The water inlet and drainage installation must be carried out by a qualified
professional.
3.
Use brand-new hoses and connector kids only.
4.
We recommend to secure the water supply with a back pressure valve.
2.3 Electrical connection
WARNING!
The appliance must be properly grounded before initial
operation. Find related information on the nameplate. Connect the
appliance to a properly-grounded safety socket only.
WARNING!
Have an improper socket replaced if it is unsuitable to
connect the appliance to. Do not use any extension cords, multiple
sockets or adapters. RISK OF FIRE!
WARNING!
Always ensure that the power cord is not bent or
squeezed during installation.
