95
Remove such tapes very carefully. Remove remains of
such tapes with a damp cloth using lukewarm water and
a mild detergent (see also chapter
CLEANING AND
MAINTENANCE
). Never remove any components of the
back of the appliance!
4.
Install the appliance in a suitable position with an
adequate distance from sources of heat and cold.
5.
If installation near a heat source is unavoidable, use a
suitable insulation plate or keep the following
minimum
distances
to the heat source:
To electric cookers
at least 30 mm
To radiators or ovens
at least 300 mm
To another refrigerators
at least 20 mm
6.
Check that the appliance and the power cord are not
damaged.
7.
Install the appliance in a dry and well-ventilated place.
8.
Protect the appliance from direct sunlight.
9.
The door(s) must open completely and without
hindrance.
10.
Install the appliance on a level, dry and solid floor. Check
the correct installation with a bubble level.
11.
Connect the appliance to the mains properly.
12.
The rating plate is inside the appliance or at the back.
