~
128
~
2.
Screw the adapter feet (
D
) into the prepared openings properly (
C
/ s. fig. below).
B
F
IXING BAR
(on both sides / 2 in total)
C
T
WO PREPARED OPENINGS
incl. nuts (on both sides / 4 in total)
D
A
DAPTER FEET
(screwed in / 4 in total)
H
OW TO LEVEL THE APPLIANCE
❖
After the appliance has been connected to the mains and gas supply and is finally
in the desired installation site, the appliance must be levelled.
❖
The appliance
must
stand in a
stable and level position
to ensure proper
operation. The supplied adapter feet enable proper levelling and individual height
adjustment relevant to the height of your kitchen furniture.
❖
The adapter feet must stand firmly on the ground so that the appliance does not
wobble. Adjust the adapter feet accordingly. The firm contact of the adapter feet
with the ground also ensures that the appliance does not vibrate or move
unintentionally.
The possible height adjustment of the adapter feet is between 90 mm (adapter
feet screwed in) and 120 mm (adapter feet screwed out).
When the appliance is not levelled, the door and the seals may not close properly.
