![Pkm EBO9.4 Instruction Manual Download Page 54](http://html1.mh-extra.com/html/pkm/ebo9-4/ebo9-4_instruction-manual_1561139054.webp)
54
H
OW TO SET THE END OF THE COOKING
/
BAKING TIME
:
1.
Place the food to be cooked or baked in the oven and close the door properly.
2.
Select the desired oven function (s. chapter 3.5
FUNCTIONS OF THE OVEN
) and oven
temperature using the corresponding rotary knobs (
A
/
C
// s. chapter 3.2.3
C
ONTROL PANEL
).
3.
Press the programme button
(
6
)
four times
.
4.
The decimal points of the clock (
3
) are flashing.
5.
The operational status indicator "
OVEN IN USE
" (
2
)
on the display
goes on.
6.
The indicator "
AUTOMATIC COOKING
" (
1
) goes on.
7.
The display indicates
00:00
.
8.
Set the desired
time of the day
by which the cooking / baking process
should be
finished
using the buttons
+
(
5
) and / or
-
(
7
).
9.
If the desired time of the day is displayed, release the
+
/
-
buttons.
10.
The cooking process starts immediately
and the countdown starts a few seconds
later.
11.
If the set time of the day has been reached, an acoustic signal sounds and the oven
will be
switched off automatically
.
12.
The indicator "
AUTOMATIC COOKING
" (
1
) and the indicator of the
TIMER
(
4
) are
flashing.
13.
You can switch off the acoustic signal by pressing any button on the display.
14.
To switch off the oven, the rotary knob for the selection of the oven functions
(A) and the rotary knob for the selection of the temperature (C) must be set
to position
0
.
H
OW TO RESET THE OVEN
:
❖
After the oven has reached the set time of the day and is switched off automatically,
it must be reset to standard mode.
1.
Press the programme button
(
6
)
once
for 3 seconds.
2.
The display indicates the time of the day.
3.
Press the programme button
(
6
)
one more time
for 3 seconds.
4.
The operational status indicator "
OVEN IN USE
" (
2
)
on the display
goes on.
5.
The indicator "
AUTOMATIC COOKING
" (
1
) goes off.
6.
The oven is ready for operation again.
CAUTION!
To
switch off the oven completely
the rotary knobs of the
oven function
and
of the temperature control must be set to position
0
. If the
Summary of Contents for EBO9.4
Page 42: ...42...