47
5.
Hold the Delay button and press the Programme button for 5 seconds. You will
hear an acoustical signal once. H flashes on the display. The factory setting is H4.
Changing of the setting
1.
Press the Delay button. Each pressing increases the value by 1. When H7 has
been reached, the setting will jump back to H0 (off).
2.
Press the Programme button to save your setting.
Water hardness range *
Mmol/l
Required setting
0
dH
Range
0-6.4
soft
0-1.1
H0
6.4-8.6
soft
1.2-1.4
H1
8.7-9.6
medium
1.5-1.8
H2
9.7-12.0
medium
1.9-2.1
H3
12.0-16.0
medium
2.2-2.9
H4
16.1-21.0
hard
3.0-3.7
H5
21.1-30.3
hard
3.8-5.4
H6
30.4-49.5
hard
5.5-8.9
H7
* You can find water hardness calculators on the internet.
4.2 Filling of the water softener container
The water softener container is beneath the lower dish rack.
❖
Only use a water softener (= dishwasher salt) which is
suitable for dishwashers
.
Other water softeners and salts, especially table salt, will damage the water
softener container.
❖
The manufacturer shall not guarantee against and is not liable for any damage
caused by an unsuitable water softener.
❖
Fill the container only shortly before you start a programme, otherwise spilled
residuals of the water softener may remain in the appliance and cause corrosion.
❖
The control light on the control panel goes off after the first programme.
