43
❖
Connect the cold water connection hose with a 3/4-inch thread connection and
make sure that it is securely tightened on both sides.
Once on the cold water
connection and on the device itself.
❖
Make sure not to kink or crush the inlet hose. Do not use a used inlet hose.
❖
The inlet hose must not be shortened or damaged because it contains live parts.
❖
Connect the inlet hose with the hose screw connection to a water tap with an
external thread (3/4 inch).
❖
Check the tightness of the connections on
both sides
!
1.
he water inlet and drainage installation must be carried out by a qualified
professional.
2.
Use brand-new hoses and connector kids only.
3.
We recommend to secure the water supply with a back pressure valve.
Water inlet hose(for cold water)
Connect the inlet hose to a connector with a 3/4 inch
thread firmly and securely. When the hoses are new
or were not used for an extended period of time, let
the water flow until the hose is clear of any
contamination.
NOTICE!
Otherwise the water inlet
may be blocked and the appliance will be damaged
.
Wastewater hook-up
. Fit
the drainage hose of your
appliance to the drainage
pipe without bending.
If the length of the hose is
not sufficient, apply to
your
authorized service for an
extension made from the
same material as the
original hose. Remember
that the length of the hose
(including
extension)
should not exceed 4
meters.
If the drainage hose is longer the 4 m. the dishes will not be cleaned properly .
Check that the connection does not leak. Fix the outlet hose with a hose-holder.
