Pkm DW12A++7TI, Instruction Manual

Page: 71 / 76

71
supply.

Appliance is overfilled.

Dishes are placed improperly.

Old or wet pulvered detergent.

Rinse aid container is empty.

Improper detergent dosage.
2. Do not use a detergent.
3. Select the longest programme.
4. Start the programme. After 18-22
minutes the main-wash cycle begins.
5. Open the door pour 2 cups of white
vinegar in the appliance (bottom).
6. Close the door and let the complete
programme run. If this measures fail,
repeat the procedure but use 1/4
cup (60 ml) of citric acid crystals
instead of the vinegar.
Cloudiness on glassware.

Soft water in combination with too
much detergent.

If you have soft water, use less
detergent. Select a short programme
for glassware.
Yellow or brown film on inner surfaces.
1. Tea or coffee stains.
2. Iron deposits in the water.
1. Clean with a solution of 1/2 cup of
bleach and 3 cups of warm water.
Clean by hand.
2. You need a special filter. Contact a
local water installation company.
White film on inner surfaces.
 Minerals in hard water.  Clean the interior with a soft sponge
and dishwasher detergent. Wear
rubber gloves! Use dishwasher
detergent only to avoid formation of
foam.
The cover of the detergent container does not close.

Setting is not OFF.

Select setting OFF and push the
door latch to the left.
Some detergent is left in the container.

Dishes block the container of the
detergent.

Place the dishes properly..
Steam.
 Normal.  There is some steam coming
through the vent near the door latch
during drying and water draining.
Black or grey marks on the dishes.

Aluminium-made objects touched
the dishes.

Clean the marks with a mild abrasive
cleaner
by hand.
Water remains on the bottom of the appliance.

Normal.

A small amount of clean water
around the outlet keeps the water