Pkm DW12A++7TI, Instruction Manual

Page: 45 / 76

45
9. The connection to the water supply should be carried out by a qualified
professional.
10. Do not operate the appliance unless all components are installed properly.
11. Do not stand or lean on the racks or the door.
12. Plastic-made items must not touch the heating elements.
13. Only wash dishwasher-proof plastic-made items in the appliance. Such items are
labelled by their manufacturer.
14. After each rinse cycle check that the water-softener container is empty.
15. Never use cleaning sprays to clean the door as they can damage the lock and
electric components.
2 INSTALLATION 2
Unpacking and Positioning
1. Unpack the appliance carefully. Completely remove the transport-protection. Be
very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
2. The spray arms may be equipped with a transport protection. Remove
the transport protection before installing the appliance.
3. Install the appliance in a dry and well-ventilated place.
4. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
5. Connect the appliance to the mains properly.
6. The nameplate is inside the appliance or at the back.
Water inlet / drainage installation
1.
he water inlet and drainage installation must be carried out by a qualified
professional.
2. Use brand-new hoses and connector kids only.
3. We recommend to secure the water supply with a back pressure valve.
Installation
1. Before installation
Installation of the condensation strip.
1. You must install the condensation strip on the bottom side of the worktop to
protect it from the water vapor released by the appliance. The condensation
strip deflects the water vapor from the worktop.