~
80
~
2.2 Pre-installation requirements
➢
The worktop must be made of heat-resisting material. Structural elements should
not interfere with the installation area.
➢
The thickness of the worktop for the installation of the hob must be
at least 30
mm
.
➢
The wall sat the hob should be covered with heat-resistant material, e.g., ceramic
tiles.
➢
During operation of the appliance (hob and / or oven), adjacent furniture or
housing and all materials used for installation must be able to resist a temperature
of min. 85 °C above the ambient temperature of the room the appliance is
installed in.
➢
If you are not sure whether the adjacent cabinets or the back wall are heat-
resistant, you should provide a clearance of approx. 20 mm around the oven.
The installation of the appliance (hob and oven) must meet the safety
requirements as well as the legal rules and regulations.
2.3 Installation of the hob
DANGER!
The hob must be installed
by a qualified professional
only
. Do not carry out the installation yourself. RISK OF ELECTRIC
SHOCK!
S
AFETY INSTRUCTIONS REGARDING THE INSTALLATION
When installing the appliance, ensure optimal heat radiation to maintain the
operating safety.
The wall and the reach of the heat radiation above the worktop must be made of
heat-resistant materials.
To avoid any damage, the sandwich layer and adhesive must resist heat.
Provide an installation opening relevant to the dimensions on the drawings in
chapter 2.3.1 D
IMENSIONS
. For installation and use, a minimum of
50 mm
space
shall be preserved around the hole.
The thickness of the worktop must be
at least 30 mm
. Choose heat-resistant
materials for the work top only to avoid any deformation caused by the heat-
radiation of the appliance.
