59
The seal
must be
fitted tightly on the bottom edge of the hob (no overlaps, no
gaps etc.) to prevent liquids etc. from entering the installation opening
subsequently.
M
OUNTING OF THE FIXING BRACKETS
:
2.
Install the fixing brackets
on the sides of the hob
using the appropriate screws:
screw
one end of the fixing brackets
into the predrilled holes
on the sides of
the hob
(s. fig. below).
3.
Insert the hob into the installation opening and push it downward carefully until
the hob and the seal are in firm contact to the worktop (s. fig. below).
The hob must be ventilated properly. The air inlet and outlet must never be
blocked or covered.
1
W
ORKTOP
2
S
CREW
3
B
RACKET
4
H
OB
5
S
EAL
NOTICE!
The hob must be in the installation opening of the worktop
properly and firmly. Check the seal for perfect fit and overall cover.
