32
9.
Do not put any heavy items onto the open door of the oven. Do not put any
cookware onto the open door of the oven. Do not lean against the open door
of the oven as you will damage the hinges.
2. Installation
2.1 Unpacking and positioning
1.
Unpack the appliance carefully. Dispose of the packaging as described in
chapter waste management.
2.
Completely remove the transport-protection. Be very careful and do not use any
aggressive or abrasive detergents to remove residuals of the transport-
protection.
3.
Check that the appliance and the power cord are not visible damaged.
4.
Do not install the appliance in a place where it may come in contact with water
or rain; otherwise the insulation of the electrical system will be damaged.
5.
Install the appliance on a
level, dry and solid floor
. Check the correct
installation with a bubble level.
6.
The nameplate is situated inside the appliance or at the back.
2.2 Installation/hob
The customer is responsible for the installation. If the manufacturer´s help is
needed to repair any damage due to improper installation, this repair work is not
covered by the guarantee. Improper installation may cause serious personal injuries
and/or property damage. The manufacturer cannot be held liable for such injuries
or damages.
