Clock timer
3.
Programming new start- and stop times.
Important!
Read tip, recommendations and example
(opposite) before commence programming.
1. Press MENU. PROGRAM appears. Confirm by
pressing OK.
2. NEW PROG appears. Confirm by pressing OK.
3. No. of available memory locations appears approx.
2 seconds. Select ON or OFF with . Confirm by
pressing OK.
4. Select hours by pressing or . Confirm by
pressing OK. Repeat with minute and confirm by
pressing OK.
5. MONDAY appears. Select first day of the program
(if other than monday) with . Confirm by pressing
OK. will now appear firm for the selected day.
6. Two options is now available (see below). Select
COPY or STORE with . Confirm by pressing OK.
• COPY is selected if you want to copy the
selected time to another day of the week.
• STORE is selected if you want to end
programming this start/stop-time. If STORE is
selected go directly to point 8.
7. If COPY is selected ADD and the next day (e.g.
TU=Tuesday) will appear. Select each day(s) with
the same start/stop-time by pressing and confirm
by pressing OK. For each day that is selected and
confirmed will appear firm. Continue by pressing
until STORE appears. Confirm by pressing OK.
8. NEW PROG appears. To continue programming a
new start- and stop time press OK. To end program-
ming press until END appears. Confirm by
pressing OK.
Exempel
Weekday
monday
tuesday
wednesday
thursday
friday
saturday
sunday
Opening hours
11:00 –
11:00 –
11:00 –
11:00 –
11:00 –
12:00 –
12:00 –
21:00
21:00
21:00
21:00
22:00
22:00
21:00
Recommended start
10:15 –
10:15 –
10:15 –
10:15 –
10:15 –
11:15 –
11:15 –
and stop times
21:15
21:15
21:15
21:15
22:15
22:15
21:15
Tip!
Before starting to program the clock timer, write down
your start and stop times for each day of the week.
Recommendations
stop times as follows:
• Start – 45 minutes before opening. The oven heats
up in just 25 minutes, but letting it run for an addi-
tional 20 minutes will ensure optimal heat distribution.
• Stop – 15 minutes after closing (in case customers
arrive shortly before closing time).
Example
The table below shows examples of opening times and
the recommended start and stop times for the oven. In
this particular example, there are 4 different times to
program.
1. Monday-Friday = on/start 10:15
2. Saturday- on/start 11:15
3. Monday-Th Sundays = off/stop 21:15
4. Friday-Saturday = off/stop 22:15
See diagram below
program the start and
