Pixsys TD240 series, Operation Manual, Page: 32 / 92

32
This operation is necessary to make the project available as soon
as implemented to the development environment PLProg 4.xx.
The compilation has effect only if PLProg is open and the terminal
TD240 has been selected as CPU.
6. Compile Ladder diagram file_name.plp: Once the Ladder
diagram sketch is finished, it is necessary to compile it, as shown
in the figure below. It is this fundamental passage that creates the
link between the Ladder file just compiled in the development
environment of PLProg4.xx with the file previously compiled in the
development environment of TdDesigner.
Only with this operation will it be in fact possible to communicate
to the terminal also the instructions inherent to the graphics of the
created project.