Manuale d'uso - TCT101-2ABC
- 43
5.1.d
Collegamento del potenziometro
10
9
8
Potenziometro 5..10Kohm.
Risoluzione 1000 punti.
Potenziometro:
per variare il Set1 o il Set2 con potenziometro esterno
eseguire le seguenti istruzioni:
1 utilizzare potenziometri da 5kohm a 10kohm come valore
di fondo scala.
2 collegare il cursore al morsetto I3; un collegamento errato
può compromettere le caratteristiche del potenziometro,
lo strumento invece andrà in protezione temperatura.
3 la risoluzione in ingresso è di massimo 1000 punti;
configurare i parametri “Upper limit” e “Lower limit” con
differenze di massimo 1000 unità. (Ex.:
LoS1
a 50,0 e
u PS1
a 150,0 per variare il tempo collegato al set1 tra 50 e 150
con passi di un decimo). Differenze superiori rendono
instabile la cifra meno significativa.
4 Per tarare il potenziometro sui valori di fondo scala entrare
in configurazione e selezionare:
H.in .3
su Pot.
F.in .3
su Set1 o Set2
P. tAr
su En.
All’uscita della configurazione posizionare il
potenziometro nel valore di minimo e premere
¶
,
posizionare il potenziometro sul valore di massimo e
premere
§
, automaticamente si esce dalla procedura di
taratura.
N.B.: uno spegnimento dello strumento blocca anzitempo la
procedura di taratura.
Summary of Contents for TCT101-2ABC
