User manual - ATR227 -
15
15
F6H
Command State Error (Password 5678)
State of contact for command output in case of error
RF
Open contact (
Default
)
FF
Closed
contact
16
FVS
Command Setpoint Protection (Password 1234)
Allows/denies modifications of command setpoint value
IUHH
Modifiable by the user (
Default)
/RFN
Locked
17
FUH
Command Reset (Password 5678)
Type of reset for command contact (always automatic in P.I.D. functioning)
DUH
Automatic Reset
(
Default
)
PUH
Manual Reset
PUHV
Manual Reset Stored
(keeps relay status also after an eventual power
failure)
18
FGH
Command Delay (Password 5678)
Command delay (only in ON / OFF functioning).
-900..+900 seconds.
Default
: 0.
Negative: delay in switching off phase.
Positive: delay in activation phase.
19
DXPD
Automatic / Manual (Password 1234)
Enables automatic/manual selection.
GLV
Disabled
(
Default
)
(Q
Enabled
(Q6W
Enabled
stored
21
6IW*
Softstart Gradient (Password 5678)
Rising gradient for Soft-Start
0 Disabled.
Default
1-9999 (degrees/hour)
24
6WLP
Softstart Time (Password 5678)
Max. Softstart duration: the process will follow the gradient only for the time set
on parameter, than moves to the max. power.
00.00 Disabled.
Default
00.01-24.00 hh.mm
25
G*WL
Digital Input (Password 1234)
Digital input functioning (see par. 7.7)
GLV
Disabled
(
Default
)
6SY
2 setpoint thresholds
UXQ
Run
