3. By pressing button[ ]or[ ],enter into the setting for minutes and hours ,
“
exposure time
”
,
“
interval time
”
,
“
shots number
”
as the sketch map.
“
”
“
”
17
16
Operate the delay shooting
1. Press the left button[ ]or right button[ ], move the
activity icon to the delay shooting icon[ ].
2. Half-press the release button, the green light lit
,
and
the
camera is in the focusing state until the release or full-
press
the
button
.
3. Full-press the release button, timer remote control
start to delay countdown, red
indicator
blink
quickly
and
enter
to
the delay shooting mode
.
4. When countdown is completed, timer remote control
will follow the setting
shots
output
a
signal per second to
control shooting
.
When running
the
delay
shooting
,
press
the
launch button again, the delay shooting
will stop.
Make sure to set the camera function to be [
].
When the camera function is set to be
[
],
it
will start
continuous
shooting
.
When the camera
function
is
set
to be [ ],the camera
will
shoot
based
on [ ] function,
it may cause underexposure or overexposure.
When the camera
function
is
set
to be
[
],
the camera
will
perform
one
or
more
delay
shooting
.
When the camera lens focus function is set to be [ M
],
the
camera
will
not
execute
focusing
action
if
half
-
press
the release button of the view receiver.
When the camera lens focus function is set to be [ A
],
even receiving the shooting signal
the camera will not shoot
at
the
moment when most of camera don
'
t seize
focus.
Timing plan for
shooting
Delay time settings
1. In the power-on state, move the functional activities
icon to the delay timing program icon[ ]by pressing the
left move button[ ]or right move button[ ].
2. Press the set button, enter the delay time for ‘second
bit’ setting.
Shooting control
Shooting control
