25
Safety Information
Important
Information
Safeguards & Important Safety Instruction
z
To reduce the risk of electric shock, do not remove cover (or back) no
user-serviceable parts inside. Refer servicing to qualified service
personnel.
z
If the wall plug does not fit into your local power socket, then ask your
electrician to replace your obsolete outlet. Do not modify the wall plug. To
do so will void the warranty and safety feature.
z
To ensure maximum performance, please read this manual carefully. Keep
it in a safe place for future reference.
z
Install this unit in a cool, dry, clean place – away from windows, heat
sources, and sources of excessive vibration, dust, moisture and cold. Avoid
sources of humming (transformers, motors). To prevent fire or electrical
shock, do not expose the unit to rain or water.
z
Never remove the unit cover. Contact your dealer if an object falls inside
the unit.
z
Do not use force on switches, controls or connection wires. When moving
the unit, first disconnect the power plug and the wires connected to other
equipment. Never pull on the wires themselves.
z
The openings on the unit cover assure proper ventilation of the unit. If
these openings are obstructed, the temperature inside the unit will rise
rapidly. Therefore, avoid placing objects against these openings, and install
the unit in a well-ventilated area to prevent fire and damage.
z
Be sure to allow a space of at least 30 cm behind, 20 cm on the both sides
and 10 cm above the top panel of the unit to prevent fire and damage.
z
The voltage used must be the same as that specified on this unit. Using this
unit with a higher voltage than specified is dangerous and may result in fire
or other accidents. PIXEL MAGIC SYSTEMS LTD will not be held
responsible for any damage resulting from use of this unit with a voltage
other than specified.
z
Digital signals generated by this unit may interfere with other equipment
such as tuners, receivers or TVs. Move this unit farther away from such
equipment if interference is observed.
z
Do not attempt to clean the unit with chemical solvents; this might damage
the finish. Use a clean, dry cloth.
z
Be sure to read the “TROUBLESHOOTING” section regarding common
operating errors before concluding that the unit is faulty.
z
When not planning to use this unit for long periods of time, disconnect the
AC power plug from the wall outlet.
z
To prevent lightning damage, disconnect the AC power plug when there is
an electrical storm.
z
Grounding or polarization
–
Precautions should be taken so that the
grounding or polarization of an appliance is not defeated.
z
This unit is not disconnected from the AC power source as long as it is
connected to the wall outlet, even if this unit itself is turned off. This state is
called the standby mode. In this mode, this unit is designed to consume a
small amount of power.
