15
Basic Setup
Basic System Setup
SETUP
→
IMAGE
SETUP
DISPLAY
SETUP
TV
SETUP
SYSTEM
SETUP
↑↓
: SELECTION
ENTER: CONFIRM ESC: CANCEL
Image Setup (IMAG)
Image Setup is used to set the overall images from your AV devices to your
Plasma Enhancer
. You can select your desired video input, adjust picture
quality etc. The basic setup will be introduced and illustrated here. The
advanced settings and configuration will be demonstrated in the next section.
®
IMAGE SETUP
→
INPUT
SELECT
↑
PICTURE
ASPECT
RATIO
DEINTERLACER
OVERSCAN
Y/C
DELAY
NOISE
REDUCER
↓
↑↓
: SELECTION
ENTER: CONFIRM ESC: CANCEL
INPUT SELECT
→
YPBPR 1
S-VIDEO
1
S-VIDEO
2
S-VIDEO
3
COMPOSITE
1
COMPOSITE
3
TV
↑↓
: SELECTION
ENTER: CONFIRM ESC: CANCEL
OR
ASPECT RATIO
→
4:3
16:9
FULL
SCREEN
16:9 LETTER BOX
2.35:1
NATURAL
NLS
↑↓
: SELECTION
ENTER: CONFIRM ESC: CANCEL
Input Select (INPU)
This allows you to select the active video source.
1 Press
MENU
button of your remote control to call up OSD menu.
2
From the SETUP page, use
↑
and
↓
buttons to highlight IMAGE
SETUP, press
ENTER
button to continue.
3
Choose INPUT SELECT, press
ENTER
button to continue.
4
Choose the video input terminal that you want to display by using
↑
and
↓
button, and then press
ENTER
button to confirm.
Tips
: You may use the Input
Select button of your remote
controls to select the active
video source directly.
Aspect Ratio (AR)
This is to establish the ASPECT RATIO (AR) of the active video source.
Different AR setting can be saved for individual video input source and you may
required to modify this for the same source
(i.e. DVD titles may have different
AR settings; you may check this from the DVD packaging accordingly
).
5 Press
MENU
button of your remote control to invoke OSD menu.
6
Choose IMAGE SETUP, press
ENTER
button to continue.
7 Choose
ASPECT
RATIO,
press
ENTER
button to continue.
8
Choose the suitable aspect ratio setting for the active video source by
using
↑
and
↓
buttons then press
ENTER
button to confirm.
