23
Important
Information
Troubleshooting
LED is not displayed properly (including power)
z
Check that the unit is connected to a working mains supply, and that it is
switched on.
No picture is displayed at your display device
z
Ensure both
Plasma Enhancer
®
and the display device is switched ON.
z
It may take up to 30 seconds for
Plasma Enhancer
®
to complete its
initialization process before the video can be displayed.
z
Ensure your display device is properly connected to
Plasma Enhancer
®
and correct video input is selected from your display device.
z
Press MENU button from the remote control and check whether the OSD
can be correctly shown on your display device.
z
Check whether correct resolution is set for your display device. Refer to
section 2, DISPLAY SETUP for more information.
z
Ensure your AV device is properly connected to
Plasma Enhancer
®
and
correct video input has been selected from
Plasma Enhancer
®
.
z
Ensure the source video is of correct format.
Picture is displayed but is unstable
z
Check cabling, particularly that the cable providing video sync is
connected correctly.
Picture appears to be stretched
z
Ensure that the aspect ratio of the video source material, aspect ratio of
your display device, and display resolution are all correctly set.
