6
Health & Safety Precautions
DO NOT touch or allow anything to make direct contact with the LED chip whilst LED200B MKIII is in use or is cool-
ing down. May burn the skin, or cause permanent damage to the LED.
DO NOT cover the LED200B MKIII body whilst in use, as it can affect heat dissipation, and cause the LED200B
MKIII unit to overt-heat, which may cause permanent damage.
ENSURE the device is given sufficient cooling-down time (approximately for 15 minutes for every hour of use) before
storage.
Please store LED200B MKIII unit in a cool dry place.
DO NOT expose the LED200B MKIII to direct sunlight, moisture, dust, chemical solutions, gasoline, grease, oil, paint,
or detergents etc. May cause permanent damage to your LED200B MKIII head unit.
DO NOT look directly into, or place Led chip at close proximity to the eyes of people or animals. Please use
:LED200B MKIII at a distance of at least 1m away from your subject unless diffused.
ENSURE the device is properly disconnected the power supply when the light is not in use, before mounting or during
maintenance.
PLEASE ENSURE your device is checked by qualified Technician before switching on again, if you LED200B MKIII
has suffered any falls or hard impacts.
ENSURE all the inflammable materials are kept away from the LED100K MKIII.
DO NOT insert metal object into the LED200B MKIII housing
DO NOT touch power cord with wet hands. Risk of electrocution
When disconnecting the Power-Cord, please pull out by the plug, and not by the cable.
DO NOT attempt to repair light. If your LED200B MKIII develops a fault, as doing so will VOID your warranty. Please
contact us at [email protected]
DO NOT dismantle the head unit unless work is carried out by a qualified technician. Dismantling your LED200B
MKIII will VOID your warranty.
50 Popes Lane, Oldbury,
West Midlands, B69 4PA
0121 552 3113
