10
Film wildlife and hunting videos like never before possible using multiple video cameras
controlled via a wireless remote control. With the simple press of a button all of your video
cameras will start recording at one time. Press the button on your SlimFire remote as the subject
comes into range and let the Remote VideoEye™ do the rest.
Trouble Shooting
Q: My Remote VideoEye unit keeps blinking 10 times and will not power down my attached
camcorder.
A:
Be sure to follow the correct steps in connecting your camcorder to the Remote VideoEye
controller box. Connect the LANC cable between the camcorder and the Remote VideoEye™. Be
sure that power is turned off to both the Remote VideoEye™ controller box and the camcorder
before connecting the LANC cable. Next turn your camcorder on into recording mode and power
on the Remote VideoEye™ controller box
Q: I do not see the red LED turn on when I power on the Remote VideoEye™
A:
Replace the AA batteries in the Remote VideoEye™.
Q: My Remote VideoEye™ won’t trigger the camcorder from my recording location.
A:
Be sure the Remote VideoEye™ unit is within the spec distance of 180 feet from your
recording location and the Remote VideoEye™ box is in clear view with no obstructions. Move
closer until you can trigger the unit.
Copyright ©,
Pix
Controller, Inc.
http://www.pixcontroller.com
,
all rights reserved.
Pix
Controller, Inc.
