M0195 b
6
/20
Installation, use and maintenance
3.1
SAFETY WARNINGS
ATTENTION
Mains -
preliminary
checks before
installation
Before installation, make sure that the electric power supply network is fit-
ted with a suitable earth-line and complies with the regulations in force. You
must avoid any contact between the electrical power supply and the fluid that
needs to be pumped.
Maintenance
control
Before any checks or maintenance work are carried out, switch the system’s
power off by disconnecting the plug from the socket.
ATTENTION
Prohibitions
It is strictly forbidden to support or transport the system using a power supply
cable. It is strictly forbidden to support or transport the system using a suc-
tion or outlet pipe.
ATTENTION
In the event of a suspected contamination of the liquid in the car tank, sanitize
the tank. Do not use the Urea Car Dispenser before recovery
3.2
GENERAL SAFETY RULES
Essential
protective
equipment
characteristics
Wear protective equipment that is:
suited to the operations that need to be performed;
resistant to cleaning products.
Personal
protective
equipment
that must be
wor
Wear the following personal protective equipment during handling and instal-
lation:
Safety shoes;
Close-fitting clothing;
Protective gloves;
Safety goggles;
Other
equipment
Instruction manual
Protective
gloves
Prolonged contact with the treated product may cause skin irritation; always
wear protective gloves during dispensing.
WARNING
Never touch the electric plug or socket with wet hands.
Do not switch the dispensing system on if the network connection cable or
important parts of the apparatus are damaged, such as the inlet/outlet pipe,
nozzle or safety devices. Replace the damaged pipe immediately.
Before each use, check that the network connection cable and power plug are
not damaged. Have the network connection cable replaced immediately by a
qualified electrician.
ATTENTION
The electrical connection between the plug and socket must be kept well
away from water.
Unsuitable extension leads can be dangerous. In accordance with current regula-
tions, only extension cords that are labelled for outdoor use and have a sufficient
conduction path should be used outdoors.
For safety reasons, we recommend that, in principle, the equipment be used
only with a earth-leakage circuit breaker (max 30 mA).
