11
/124
11
/20
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
suzzarablue side pro/basic
Translated from Italian
8
TREATED PRODUCT CHARACTERISTICS
Products per-
mitted
The "SUZZARABLUE" dispensing system was designed and built to dispense
a special liquid, made from an aqueous urea solution, known as AdBlue®/
AUS32 , based on the ISO 22241 standard SUZZARABLUE can also be used
with water.
Products not
permitted
ATTENTION
All products not listed in the "Intended Use" and "Treated Product Character-
istics" paragraphs are to be considered not permitted, improper and there-
fore prohibited.
Piusi S.p.A. accepts no responsibility for damage to persons or property
caused by failure to comply with this requirement.
9 INSTALLATION
Foreword
The "SUZZARABLUE" dispensing system has been designed and equipped
for IBC tank installation.
Any different form of installation must guarantee secure fastening.
Authorised
installation
personnel
All installations must be carried out by authorised and competent personnel
only. Authorised persons must
- install the system in dry and well-ventilated place;
- ensure the correct installation of equipment required for the correct func-
tioning of the pump;
- only use accessories that have been supplied with the system.
ATTENTION
The use of accessories that are unsuitable and were not provided with the
system is strictly prohibited. Piusi S.p.A. accepts no responsibility for dam-
age to persons, property or the environment caused by failure to comply
with this requirement.
The “SUZZARABLUE” dispensing system is for professional use only.
As per the current legislation, the “SUZZARABLUE” dispensing system
must be installed in premises that are sufficiently well-lit.
The “SUZZARABLUE” dispensing system has been specifically designed for
use in a dry place. If installed outside, an adequate protective covering
must be provided.
