Piusi PW Mobile, Installation And Use Manual

Page: 45 / 64

45
/124 45
/64
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
translated from italian
PW Mobile
11.3 PW MOBILE INSTALLATION ON ELF SERVICE FM AND MC 2.0
1 Use the measurements described in the image to place the “SELF SERVICE
DRILLING GUIDE” on the back of the Self Service
2 Make 4 holes on the sheet in the positions indicated on the guide, with a ø 5
tip: be very careful not to damage cables and internal components
3 Use the hose support hanging as reference to find the position of 2 more
holes as indicated in the image
4 Make holes for the cable clamps: be very careful not to damage cables and
internal components
5 Assemble the PW Mobile case on the Self Service, through the case holes,
using supplied screws and nuts, and the cable clamps
6
Insert the power and RS485 DB9 cables into the clamps just installed
7 Proceed with wiring as described in chapter 11.4
140
55
90
145
35
Ø19 n. 1 foro
Ø13 n. 1 foro