15
/124
15
/28
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
translated from italian
delphin PRO - IBC - PRO_X
EN
13 SYSTEM CUSTOMIZATION
THIS CHAPTER, WITH ALL ITS PARAGRAPHS, REFERS TO THE “PRO” AND “PRO_IBC” MODELS.
FOR THE FUNCTIONS OF THE PRO_X MODELS, SEE THE QUICK GUIDE M0495.
13.1 USERS BUTTONS
FOREWORD
The METER features two buttons (RESET and MODE) which individually
perform two main functions and, together, other secondary functions.
MAIN FUNCTIONS
PERFORMED
- for the RESET key, resetting the partial register and Reset Total
- for the MODE key, entering instrument calibration mode
SECONDARY
FUNCTIONS
Used together, the two keys permit entering configuration mode where the
desired unit of measurement can be set.
LEGEND
CALIBRATE MEANS PERFORMING ACTIONS ON THE METER KEYS. BE-
LOW IS THE LEGEND OF THE SYMBOLS USED TO DESCRIBE THE AC-
TIONS TO BE PERFORMED
BRIEF
PRESS OF
MODE
BUTTON
MODE
LONG
PRESS OF
MODE
BUTTON
MODE
MODE
MODE
BRIEF
PRESS OF
RESET
BUTTON
LONG
PRESS OF
RESET
BUTTON
13.2 OPERATING MODES
OPERATING
MODES
The user can choose between two different operating modes:
The meter features a non-volatile memory for storing the dispensing data, even
in the event of a complete power break for long periods.
The measurement electronics and the LCD display are fitted in the top part of
the measurement device which remains isolated from the fluid-bath measure-
ment chamber and sealed from the outside by means of a cover.
1 - Normal Mode
Normal Mode: Mode with display of Partial and Total dispensed quanti-
ties
2 - Flow rate Mode
Flow Rate Mode: Mode with display of Flow Rate, as well as Partial dis-
pensed quantity.
