background image

16

More Information

Eurorack Specs

Panel size: 38hp.
Module depth: 35mm.
Power consumption: +12v 165mA, -12v 95mA. Does not r5v. Reversed power
polarity protection. Due to the complexity of this module, it requires a significant amount of
power. Please use a clean, high quality power source for optimum performance.

Warranty

For a period of one year after the date of original purchase, the Lifeforms Touch Controller
manufactured by Pittsburgh Modular Synthesizers LLC, is warranted to function properly
and be free of defects in materials and workmanship. Should a factory installed hardware
fail during the warranty period, contact Pittsburgh Modular Synthesizers LLC. We will repair
it (or at our option, replace it) at no charge, and pay the cost of shipping it back to you. This
warranty is void if in our opinion the Lifeforms Touch Controller has been damaged by
accident, mishandled, altered, improperly serviced, or repaired by the customer where such
treatment has affected its performance or reliability. This includes but is not limited to
damage related to incorrectly attaching power ribbon cables. In the event of such
misuse/abuse by the customer, costs for repairs plus two-way shipping costs will be borne
by the customer. Products found defective should be returned to the factory carefully
packed, as the customer will be responsible for freight damage. Incidental or consequential
damages or costs incurred as a result of product malfunction are not the responsibility of
Pittsburgh Modular Synthesizers LLC.

Service and Contact Information

Please contact us for service or other information related to the Lifeforms Touch Controller
or any other Pittsburgh Modular product.

www.pittsburghmodular.com/contact

Summary of Contents for Lifeforms Touch Controller


















Reviews: