5.1 select a pattern overview
The Percussion Sequencer stores 32 user created sequences in 2 groups of 16.
Pattern Group A and Pattern Group B.
5. select a pattern
7
5.2 how to select a pattern
Step 1. Press the [pattern group a button] or [pattern group b button] to
activate one of the pattern select pages on the touchpad.
The corresponding group LED ([1-16] or [17-32]) will turn on to show the
selected pattern group page. The [pattern group a] page contains patterns 1
through 16. The [pattern group b] page contains patterns 17 through 32. This
page will time out 4 seconds after the [pattern group a] or [pattern group b]
button or the last keypad is pressed. Empty patterns are shown with the
corresponding keypad LED o
ff
. Recorded Patterns are shown with the
corresponding keypad LED solid on. The active pattern LED will blink slowly.
Step 2. Select a pattern by pressing one of the the 16 keypads.
The sequencer switches to the selected pattern after the final step of the active
pattern. The selected pattern LED will blink quickly until it becomes the active
pattern.
