6. record a new beat (cont.)
10
6.3 how to record a beat in step record
mode
Use this mode to program a beat one channel at a time using the touchpad.
1. Press the [channel select button] to activate the channel select page on
the touchpad.
The [9/25 ch 1 keypad], [11/27 ch 2 keypad], [13/29 ch 3
keypad], [15/31 ch 4 keypad], and [8/24 exit keypad] LEDs will turn on to show
selection choices. This page will time out 4 seconds after the [channel select
button] is pressed.
2. Select a channel to edit.
Press the [9/25 ch 1 keypad] to select channel 1 to
edit. Press the [11/27 ch 2 keypad] to select channel 2 to edit. Press the [13/29
ch 3 keypad] to select channel 3 to edit. Press the [15/31 ch 4 keypad] to select
channel 4 to edit. By default, there are 32 steps in a sequence. By default, the
touchpad will automatically switch between pages to always show the active
step. Pressing the [steps button] will switch between step groups 1-16 and
17-32. The corresponding group LED ([1-16] or [17-32]) will turn on to show the
active group page. This page will time out 4 seconds after the [steps button] or
the last keypad is pressed. The active step controlled by the clock is designated
using a solid LED on the keypad corresponding to the active step of the beat.
3. Enter a pattern by touching the 16 keypads.
4. Once you are happy with the pattern, select a di
ff
erent channel to
program.
5. Press [record button] to stop recording.
The [play record LED] will stop blinking and the sequence will be saved.