Fluid Power Car User Guide 60070 V0113
7
Powering the Car
1. Make sure the 6 cc syringe on
the car is completely depressed.
2. With the 12 cc syringe
depressed, insert its tip into
the cup of water and pull back
the plunger to fill the syringe.
Attach the tubing to the end and
depress the syringe to fill the
tubing with water.
3. Attach the other end of the
tubing to the syringe on the car
body. Remove the 12 cc syringe
and refill it to the 10 cc line. Attach it again to the tubing.
4. To operate the car, set it on a flat surface such as the floor, counter, or
tabletop. Depress the 12 cc syringe plunger and then pull it back out –
continue to do this to make the car move forward.
Step 2
Completed Car
