Banty Roaster User Guide 59755 V0210
3
Assembling the Base
1. Peel the paper backing from all plastic parts.
2. Assemble the braces – Locate the braces, threaded mounting brackets,
four of the 6-32 x 3/8” PHP screws, and four 6-32 hex nuts. Attach the
round ends of a bracket to each end of the braces with the screws (Figure
1). Secure each with a hex nut, loosely
tightened.
3. Attach the braces to the legs –
Locate the legs, the remaining 6-32 x
3/8” PHP screws, and the assembled
braces. Note that the notches on the
ends of the braces are of two different
widths. The widths correspond to the
size of the slits in the legs.
4. Slide the braces into their
corresponding slots and secure with a
screw, loosely tightened (Figure 2).
5. Tighten all screws and nuts, ma
king
sure the braces fit snugly in their
slots.
Figure 1 – Attach mounting
brackets to braces.
Figure 2 – Attach braces to legs.