SV62750 Rev. A | Operator Guide
8 | SH59 Shredder
Emptying the CD/DVD Collection Tray
When the CD/DVD collection tray becomes full (i.e., after shredding about 20 CD’s/DVDs), the CD/
DVD collection tray full icon lights up and the machine turns off. To empty:
1. Open the door.
2. Remove the paper collection bin with CD/DVD collection tray from the lower housing section
and empty the contents from the CD/DVD tray.
3. Press
the
forward
button briefly to acknowledge that the CD/DVD collection tray has been
emptied. This resets the CD/DVD shredding counter back to zero.
4. Place the empty CD/DVD collection tray back on top of the paper collection bin and slide
collection bin into the lower housing section. Close the door.
NOTE:
The machine will only run if the door is closed.
Maintenance
Cleaning the Material Sensor Photocells
At some point, paper shreds or dust may accumulate on material sensor photocells that may impair
their function. For example, after a paper jam, if paper particles should come to rest in the feed slot,
the machine may not turn off because the sensors are detecting “paper” in the machine that it thinks
it needs to move through the shredder.
To remove these paper strips and clean the photocells, you can:
• pass another sheet of paper through the feed slot and switch the machine to reverse
• wipe the top and bottom photocells with a small brush or cotton swab
Lubricating the Cutter Blades
The cutter blades must be lubricated after a specific operating time (you will know this when the
lubrication needed icon lights up). Follow these steps to lubricate the cutter blades:
1. Open the door.
2. Remove the lubrication oil bottle from the holder in the door and close the door.
3. Pour a little oil onto a sheet of paper and feed this through the paper feed slot onto the cutters.
The paper is drawn in and the oil is distributed to the cutter blades.
4. When finished, open the door.
5. Press
the
reverse
button and keep it held down until the lubrication needed icon goes out.
6. Close the door.
7. The cutters does a cleaning cycle automatically (runs forward and reverse) and switches off.
The machine is ready for use again.
Automatic Energy Saving
If the machine is not used after five minutes, it automatically turns off. Press the
ON/OFF/Stop
button to turn it on again.
Disposing Of The Machine
Dispose of the machine in an environmentally friendly fashion at the end of its useful service life. Do
not dispose of any of the parts included in the machine or its packaging with household waste.
