Pitney Bowes SendPro C series Operator'S Manual Download Page 156

Page: 156 / 232

"CSD Senior Device has stopped" message

Issue

If the SendPro® C-Series displays the message "CSD Senior Device has stopped" and will not run mail.

Cause

The internal meter software has encountered an error.

Solution

1. Reboot the meter:

a. Unplug the power cable.

b. Wait for the display to turn off.

c. Wait one minute.

d. Plug the power cable back in, ensuring that it is plugged directly into a wall outlet.

2. Tap the

Settings

(gear) icon in the global toolbar.

3. Tap

Mail Printer Maintenance

4. Tap

Print Test Pattern

5. Run a test print.

If the test print is

good

, tap on the

Home

icon

If the test print is

not good

, contact Technical Support; have your model and serial number

ready.

Errors

Pitney Bowes

Operator Guide

June 2018

156

Summary of Contents for SendPro C series









































































































































































































































Search results

Summary of Contents for SendPro C series

Reviews:

Pitney Bowes SendPro C series, Operator'S Manual, Page: 156 / 232

Search results

Summary of Contents for SendPro C series

Reviews: