Pitney Bowes E589 Series, Operating Manual

Page: 14 / 32

SV60975 Rev A
6. Adjust the side guide to fit the
envelope width. To find the
envelope width, place the
envelope on the deck and against
the rear wall. Adjust the
sideguide so that only 1/16" of
space is between the envelope
and the sideguide.
For larger mailers (9" x 12"), lay
plastic guide flat and raise
secondary metal side guide.
Adjust same way as above.
7. Select the mode by pressing one
of the keys as indicated in the
illustrations to the left.
Always feed already sealed
envelopes in Print Only mode.
Feeding sealed envelopes in
other modes may cause jams.
The envelope automatically feeds,
seals and prints.
If you selected to seal the envelope:
after the envelope ejects into the
catcher tray, apply pressure to the
envelope to finish sealing.
After the envelopes have been
processed, the mailing machine
automatically shuts off.
To feed more envelopes in the same
mode, press the desired mode.
If the Check Mailpiece or Check Meter lights are lit, correct the problem
and press Clear. Refeed the mailpiece. For details, see Troubleshooting,
section 6.
8
To print postage
and seal the envelope
To seal only
To print postage only
Print
Only Power Seal
Only Tape Clear
Check
Mailpiece
Check
Meter
Print
+ Seal
Print
Only Power Seal
Only Tape Clear
Check
Mailpiece
Check
Meter
Print
+ Seal
Print
Only Power Seal
Only Tape Clear
Check
Mailpiece
Check
Meter
Print
+ Seal