2 • Operation
2-8
SV61656 Rev. A
Filling the Sealer
When the sealer unit needs refilling, the
Add Sealing
Solution
symbol flashes in the display.
Add E-Z Seal
®
or water in the following way:
Note:
We recommend E-Z Seal
®
to minimize scale buildup
and the growth of algae.
Hinge open the sealer bottle cov
-
er located at the rear right hand
side of the machine. Remove the
bottle.
Fill the bottle up to the level indi
-
cated.
Put the sealer bottle back in posi
-
tion and close the cover.
Note:
If the sealer unit has emptied completely, allow enough time
for the solution to soak through the sealer mechanism. This
helps assure good seals.
Adjusting the Stacker
Adjust the drop stacker to suit the
material you’re running.
Lift the lever at the rear of the
stacker and adjust the stacker
to one of the preset positions.
Lower the lever to lock the stack
-
er into position.
When not in use, you can raise
and latch the stacker vertically against the exit area of the machine
as shown in the photo above.
Summary of Contents for DI380 OfficeRight
