50
6.5.
Remote Control
Dial the number of the main unit panel by phone, and after 1 ring, you
will hear a voice prompt “Please enter password”. If the password is
correct, you will then hear a voice prompt “Please enter instruction"
then you can press
1 to arm
, Press
2 to disarm
, Press
3 to monitor
,
or Press
4 to intercom
. If the password is incorrect, you will hear a
prompt voice “Wrong password, please re-enter”.
The system default operate password is
1234
. Make sure to enter the
password firmly by pressing and holding one digit at a time so you can
hear a beep for each key press.
You may need to hold keys for half a
second at a time.
Press [1]
: arm, if finished successfully, you will hear a voice prompt
“System armed”.
Press [2]
: disarm, if finished successfully, you will hear a voice prompt
“System disarmed”.
Press [3]
: monitoring for 30 seconds, to continue monitoring, press [3]
again for another 30 seconds. You can cancel monitoring at anytime by
pressing [1] to arm and [2] to disarm.
Press [4]
: two-way intercom for 30 seconds. You cannot operate the
main unit panel during this time. You can cancel intercom at anytime by
pressing [1] to arm and [2] to disarm.
